
Add to Cart
D-SUB 9 / 15 pins RS485 / RS422 / RS232 surge protector for computer equipment
TS-RSP series RS232 surge protector for computer equipment is used at LPZ 2-3 boundary, provide surge protection for RS485, RS422 or RS232 signal devices from damages, such as surge voltages, operating over voltages, electrostatic discharging and so on according to IEC 61643-21 standard.
Model | TS-RSP9 | TS-RSP15 |
Nominal voltage | 12V- | 5V- |
Rated voltage (max. continuous voltage) | 15V- | 8V- |
Lightning impulse current (10/350) | / | / |
Nominal discharge current (8/20) | 100A (line-SG) | 200A (line-SG) |
Nominal discharge current (8/20) | 100A (SG-PG) | 800A (SG-PG) |
Max. discharge current (8/20) | 200A (line-SG) | 400A (line-SG) |
Max. discharge current (8/20) | 200A (SG-PG) | 1.3kA (SG-PG) |
Voltage protection level at In | ≤24V (line-SG) | ≤16V (line-line) |
≤200V (SG-PG) | ≤16V (line-SG) | |
≤16V (SG-PG) | ||
Voltage protection level at 1kV/ms | ≤21V (l ine-SG) | ≤11V (line-line) |
≤90V (SG-PG) | ≤11V (line-SG) | |
≤11V (SG-PG) | ||
Bandwidth | 10 MHz | 4 MHz |
Response time | ≤1ns (line-SG) | ≤1ns (line-SG) |
≤1ns (SG-PG) | ≤1ns (SG-PG) | |
Max. data transmission rates | 1Mbits/s | |
Operating temperature range | -40°C...+80°C | |
Relative humidity | ≤ 95% (25°C) | |
Protective lines | Line: 8/ SG/PG | 2 two-core lines |
Pinning | Line: 1/2/3/4/6/7/8/9, SG: 5 (standby lines disconnected) | 2/9 1st pair; 4/11 2nd pair; 8:SG: 1:PG (standby lines disconnected ) |
Mounting in | D-Sub, 2 threaded screws | |
Connection (input / output) | D-sub 9 socket/plug | D-sub 15 socket/plug |
Technical Data S2
PDF Catalog Download - TS-RSP Series D-Sub SPD.pdf...
Tag: RS232 surge protector, surge protector for computer, surge protector for computer equipment