TS Lightning Protection Co.,Limited
Start Future From Safety NO LIGHTNING ACCIDENT IS ALLOWED
Add to Cart
Stainless Steel Case Explosion Proof Surge Protector For Hazardous Area
Description: Installed at LPZ OB-2 or higher inside the control equipment, the built-in cable connected with the control equipment’s wiring terminal. TS-24 explosion proof surge protector is available to apply in intrinsically safe circuit in hazardous areas and 4-20mA measuring control system and bus system.
Technical Data:
| Model | TS-EX24 | |
| Normal Voltage | Un | 24V- |
| Rated voltage (max. continuous voltage) | Uc | 32V- 22.6V ~ |
| Lightning impulse current | Iimp | 1.5kA ((10/350) |
| Normal current | IL | 0.55A |
| Nominal discharge current | In | 10kA (per line); 10kA(total) @ (8/20) |
| Voltage protection level at In | Up | ≤ 58V (line/line); ≤ 1700V (line/PG) |
| Voltage protection level at 1kV/μs | Up | ≤ 50V (line/line); ≤ 1200V (line/PG) |
| Bandwidth | fG | 67MHz |
| Capacitance | C | ≤ 25pF (line/line); ≤ 15pF (line/PG) |
| Operating temperature range | -40 0C ~ +80 0C | |
| Mounting in | M20 x 1.5 screws | |
| Connection (input / output) | 1.3 mm x 250mm length of the connecting lead | |
| Earthing via | Connecting lead | |
| Housing | Stainless steel case | |
| Comply with | IEC-61643-21, GB18802.21, YD/T 1542 |
MAIN CHARACTER
| Installation Guide
Regularly inspect the operating status, especially after lightning. Once the communication is off, electrician should check/replace the surge protector.
|
| INSTALLATION DIAGRAM for reference
|
| WARNING TIPS:
|
PDF Catalog Download - TS-EX24 SPD for Hazardous ...
Tag: Explosion Proof Surge Protector
